Palsonic 7128 - Manual (Page 16)

the screen displays AV1 and colour system; Press the button again and the set will be switched to
AV2, the screen displays AV2 and colour system. Press the button once more, the set will be
switched to TV mode and the screen displays current TV channel.
12
AUTO
Press AV
Note: S-VHS IN and AV2 use the same interface. If you want to receive signals input
through S-VHS terminal, switch the set to AV2, the S-VHS (S-VIDEO) input terminal has
priority over the AV2 VIDEO terminal; To use equipment connected to the AV2 VIDEO IN
terminal, disconnect any plug from the S-VHS terminal. S-VHS and AV2 use the same group
of AUDIO IN terminals.
1) When receiving broadcasting TV program (the TV signals are input through aerial terminal),
press the AV button to switch the set to TV mode.
2) When receiving programs played back by Video DISC., VCR, Satellite receiver, VCD (the
signals are input through AV terminals), please set the receiver to corresponding Video mode
(AV1 or AV2).
* In video mode, the sound system button and the PRESET menu in the main menu have no
function.
15
Press AV Press AV
After 4
seconds
AV1
AUTO
AV2
AUTO