Connecting peripheral equipment, Video recorder, Other equipment front panel connectors – Philips 14PT1521 User Manual
Page 12
0
Connecting peripheral equipment
Carry out the connections shown opposite, using a good
quality euroconnector cable.
If your video recorder does not have a euroconnector socket, the only
connection possible is via the aerial cable. You will therefore need
to tune in your video recorder's test signal and assign it programme
number 0 (refer to manual store, p. 6).
To reproduce the video recorder picture, press
0
.
Video recorder with decoder
Connect the decoder to the second euroconnector socket of
the video recorder. You will then be able to record scrambled
transmissions.
Video recorder
Satellite receiver, decoder, games, etc.
Make the connections as shown opposite.
Depending on the versions, the connectors are located on
the front (sometimes under a flap) or on the right-hand
side of the TV set. Make the connections as shown
opposite.With the key, select
EXT (and AV).
Headphones
When headphones are connected, the sound on the TV
set will be cut. The
@ ” #
keys are used to adjust the
volume level.
The headphone impedance must be between 32 and 600 Ohms.
Other equipment
Front panel connectors
(only available on certain versions)
To select connected equipment
Press the
key to select
EXT (and AV) for the side connections.
Most equipment (decoder, video recorder) carries out the switching itself
Telra_12536-951 1-6 (GB)_130106.10 10
1/16/2006 1:54:55 PM