Perle Systems 5500305-20 - Manual (Page 12)

Gigabit Media Converter Module – Installation Guide
12
Installing the Copper Cable
•
Locate a 1000Base-X compliant simplex (1 strand) fiber cable
with appropriate connectors.
•
Connect the fiber cable from one Converter to the other
Converter/switch/fiber device.
Installing the Copper Cable
•
Locate 1000Base-TX compliant copper cables with male, RJ-
45 connectors installed at both ends.
•
Connect the RJ-45 cable between the Perle Media Converter
Module and the device.
Note: Since the Media Converter Module supports Auto-MDIX,
either a straight-through or cross over Ethernet cable may be
used.