Porter-Cable 90550832 - Manual (Page 11)

11
REPLACING THE BULB (FIGURES F, G)
WARNING:
Shock Hazard. Disconnect battery pack before
replacing the bulb. Such preventative safety measures reduce the risk of personal injury.
CAUTION:
Burn hazard. Lens or bulb may be hot immediately after use.
Porter Cable Service Replacement Bulb
Flashlight Catalog Number Service Part Number Bulb
PC1800AL 5140060-17
NOTE: Use only DC5273 Replacement Bulb.
To replace the bulb:
1. Remove the lens cover cap (8) and the
bulb holder (7) as shown in figure F.
2. Pull the bulb (6) out as shown in figure G.
3. Insert new bulb.
4. Reinstall the bulb holder (7).
5. Reinstall the lens cover cap (8).
NOTE: Do not look directly into the light
beam.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
• Light will not illuminate. • Battery not installed properly. • Check battery
installation.
• Battery not charged. • Check battery
charging requirements.
• Light bulb needs replacing. • Replace bulb as
outlined in this manual.
• Battery will not charge. • Battery not inserted into charger. • Insert battery into
charger until LED appears.
• Charger not plugged in. • Plug charger into a
working outlet. Refer to
“Important Charging
Notes” for more details.
For assistance with your product, visit our website at www.portercable.com for a list of service
centers, or call the Porter-Cable Customer Care Center at (888) 848-5175.
F
G
7
6
8
90550832 PC1800AlREVISED with pcxmvc charger added 4/27/09 8:14 AM Page 11