Philips 190TW8 - Manual (Page 11)

To enable this feature:
Setting a personal PIN
1
Press the MENU key on the remote
control to bring up the OSD.
2
Use the directional keys to navigate to the Settings menu. Then select
Set PIN
.
(see note)
3
Enter a four-digit password. Type it again and press OK to reconfirm.
4
Press MENU to exit.
Locking TV Channel
1
Press the MENU key on the remote
control to bring up the OSD.
2
Use the directional keys to navigate to the Channel Management menu.
Then select Lock This Channel .
3
Enter your PIN. Type it again and press OK to reconfirm.
(see page 10 note)
Settin gs
Menu Lan ua e g g
Sleep
Wide Mode
Factory Default
En lish g
Off
Full
Move Enter Back
Channel Mana gement
Country
Reorder
Skip
Manual Scan
Name
Auto Scan
Frequency
Germany
Off
639 22Mhz .
Move Enter Back
11
Set PIN
Lock This Channel
* The default PIN for this TV Monitor is "0000." First enter "0000" when you want to change the PIN.
If youforget your PIN, please enter 6163 to reset.