Panasonic WJ-FS309 - Manual (Page 30)

30
OPERATING PROCEDURES
ENTRANCE
Camera 3 Picture
Camera 6 Picture
Example of spot camera picture sequence
SEQ
■ Monitoring the Camera Picture
● SPOT OUT
1. Spot Picture
1. Press a SPOT/MULTISCREEN button so that the LED
of SPOT/MULTISCREEN button lights up.
2. Spot Sequence
1. Press the SEQ button.
A sequence of single pictures is displayed in the order
and dwell time selected for the MLT/SPT SEQ SETUP
parameter in the SEQUENCE SETUP menu.
Note: Refer to the Sequence Setup on page 15 for
more details.
2. To cancel a sequence, press the respective CAMERA
SELECT button.
The selected camera picture appears in spot mode.
2. Press a CAMERA SELECT button to display a camera
picture on the monitor screen.
The LED on the pressed
CAMERA SELECT button
lights up.
SPOT
MULTISCREEN