Philips DVD726v2 - Manual (Page 39)

Analog Output 39
Use the ANALOG AUDIO SETUP PAGE to adjust some of the Player’s audio
settings.
Adjust DOWNMIX according to how you connected the Player to your TV
and/or Stereo. Balance the volume during playback by adjusting Dynamic Range
Control (D.R.C.).
1 Press SYSTEM MENU.
2 Press 2 to select the AUDIO SETUP PAGE icon at the top
of the menu. Press OK or 4.
3 ANALOG AUDIO SETUP will be highlighted. Press OK.
4 Press 3 or 4 to select DOWNMIX or D.R.C., then
press 2 and follow step 5 according to your choice.
5 • If you selected DOWNMIX, press 3 or 4 to select LT/RT
(left/right) or STEREO, then press OK. Your selection will be
highlighted in brown. Choose LT/RT if you connected the Player to a
stereo that has Dolby Pro Logic. Details are on page 14. Select STEREO
if you connected the Player to a TV or Stereo that has left and right
Audio In jacks but does not have Dolby Pro Logic.
• If you selected D.R.C., press 3 or 4 to select ON or OFF, then
press OK. Your selection will be highlighted in brown.To level the
volume during Disc playback, choose ON.There will not be such a large
range between the loudest and softest parts of the sound.To hear the
highs and lows of the volume, set D.R.C. to OFF.
6 Press SYSTEM MENU to remove the menus.
1,6
2-5