Precision Power TD450 - Manual (Page 7)

5
Follow these simple instructions and refer to the diagram below to
make your speaker connections:
•
Using at least 16 gauge wire, run wire from the speakers to the
amplifier(s) using the same precautions that you followed for
running the power, ground, and remote wires
• Cut off excess wire
• Use wire strippers to strip 1/4 inch of insulation at the end of
the wires
• Attach the speaker wires to the amplifier’s
POWERLOCK connectors and plug
them in
S p e a k e r C o n n e c t i o n s
Right Speaker negative
Right Speaker positive
Left Speaker positive
Left Speaker negative
Speaker Power Lock Connector
Right Speaker negative
Right Speaker positive
Remote turn on
Left Speaker positive
Left Speaker negative
Speaker Power Lock Connector
BACK TO CONTENTS