Ultra-slim profile wall mount (krp-wm02), Video & audio connectivity, Product dimensions – Pioneer Kuro PRO-101FD User Manual

Page 2: Elite, Kuro, Signature series pro-101fd

PIONEER, ELITE, and the Pioneer and Elite logos are registered trademarks of Pioneer Corporation.
Specifications and design subject to modification without notice.
Plasma Display Systems display images consisting of hundreds of thousands of minute pixels (light emit-

ting cells), and there is a possibility that some pixels may be inactive, flashing or continually illuminated.
Plasma Display Systems are made of glass; be sure to secure it from damage from impact.
Plasma Display Systems, while in use, may generate some functional sounds, for example: fan motor

noise, and electrical circuit humming/glass panel buzzing.
All phosphor-based display systems (CRT Television Systems—both direct view and projection televi-

sions—as well as plasma display systems) may develop image retention, sometimes called burn-in if

permanent. Recommended guidelines are as follows:

Do not display still images for long periods (such as fixed images from PC or TV game equipment, and/or

time of day indicator or channel logo display).
Do not display content in the 4:3 aspect ratio (black or gray bars on left and right side of content) or

letter-box content (black bars above and below of content) for extended periods of time, or use either of

these viewing modes repeatedly within a short period of time. This Plasma Display System is equipped

with multiple wide-screen viewing modes; use one of these screen modes to fill the entire screen

with content.
Displaying dark images after displaying still images for a period of time may cause image retention. In

most cases, the image retention can be corrected by displaying bright images for a similar period of

time. However, if your Plasma Display System displays still images for additional long periods of time,

image retention may be irreparable.

Plasma Display Systems emit slight amounts of IR (Infrared) emission through luminous discharge technol-

ogy. This IR emission is not harmful to living organisms, but may interfere with the operation of remote

controls for other equipment, or cause static in equipment using IR signals (such as cordless headphones

or cordless microphones).
HDMI and the HDMI logo are registered trademarks of HDMI Licensing, LLC.

UltRa-slim PROFile

wall mOUnt (KRP-wm02)

Specifically designed to preserve the PRO-101FD’s slim design

›

when wall-mounted (optional – sold separately)

integRateD tecHnOlOgies

ViDeO PROcessing

tecHnOlOgy

Picture Detail Settings – DRE Picture, Black Level, ACL, Enhance

›

Mode, Gamma and CTI
Noise Reduction Setting – 3 DNR, Field NR, Block NR,

›

Mosquito NR
Color Detail Settings – Color Temperature (5 Pre-settings or

›

Manual adjustment), CTI, Color Management
3DYC (Off / High / Mid / Low)

›

IP Mode (1 / 2 / 3)

›

Drive Mode (1/ 2 / 3)

›

ViDeO & aUDiO cOnnectiVity

Inputs

›

4 Independent HDMI 1.3

–

1 DVI w/HDCP

–

1 Component

–

1 Composite

–

1 RS-232C

–

LAN (10/100 Base-T Ethernet) for IP Control

–

Output

›

IR Repeater

–

PRODUct DimensiOns

Panel (W x H D): 48-17/32” x 28-15/32” x 2-17/32”

›

Panel Weight: 69.2 lbs. (31.4 kg)

›

ELITE

KURO

™

SIGNATURE SERIES

PRO-101FD

50-Inch Class (49.85” Diagonal)

High-Definition Flat Panel Monitor