Philips 107E60 - Manual (Page 32)

Frequently Asked Questions
●
Check that the cable is attached correctly to the computer.
●
Press any key on the keyboard to wake-up the computer from power saving mode.
44. Why is there no picture on my monitor even though the power LED is green?
●
Verify the Contrast and Brightness setting of the monitor. First press and hold the
5
(-) button to
increase Contrast and then press and hold the
4
(+) button to increase Brightness. These
buttons are located on the front of your monitor.
●
Press both the
5
(-) button and the OK button at the same time to switch input A|B.
●
Try and repeat step 48 above.
45. Why does the picture disappear after I press the on/off button quickly?
This is a unique Philips feature designed to preserve the life of your monitor. Please allow 5 seconds
between powering off and on your monitor, your picture will then be restored.
file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (13 of 13)2005-04-08 ¤W¤И 11:21:37