Pepper Computer Wireless Pad - Manual (Page 8)

Setting up your Pepper wireless pad 6
Using the power button
The power button is on the top right of the Pepper pad. When your
pad is on, this button is lit.
You always use this button to turn the pad on.
You can also use this button to put the pad to sleep or to turn
it off completely.
Putting your pad to sleep
When you haven’t used your Pepper pad for a period of time (the default is
10 minutes), the pad goes to sleep in order to conserve the battery charge.
When the pad is sleeping, the power light pulses slowly.
When you turn your pad on after it has been sleeping, everything starts up
instantly exactly where it was when the pad went to sleep. After the pad
has been in sleep mode, it may take up to 15 seconds to establish a
connection to a wireless network.
If you know you won’t be using your pad for a half an hour or so, you may
want to put it to sleep manually. To put your pad to sleep manually, press
the power button briefly.