Pioneer DV-595K-S - Manual (Page 36)

Audio Settings and Video Adjust menus 06
36
En
Chapter 6
Audio Settings and Video
Adjust menus
Audio Settings menu
The Audio Settings menu offers features for
adjusting the way discs sound.
1 Press HOME MENU and select ‘Audio
Settings’ from the on-screen display.
2 Select and change settings using the /
/ / (cursor) buttons, and ENTER.
Audio DRC
• Settings: High , Medium , Low , Off
(default)
When watching Dolby Digital DVDs at low
volume, it’s easy to lose the quieter sounds
completely—including some of the dialog.
Switching Audio DRC (Dynamic Range
Control) to on can help by bringing up the
quieter sounds, while controlling loud peaks.
How much of a difference you hear depends on
the material you’re listening to. If the material
doesn’t have wide variations in volume, you
may not notice much change.
Note
• Audio DRC is only effective with Dolby
Digital audio sources.
• Audio DRC is only effective through the
digital output when Digital Out is set to
On , and Dolby Digital Out is set to Dolby
Digital > PCM (see Digital Audio Out
settings on page 38).
• The effect of Audio DRC also depends on
your speakers and AV receiver settings.
Virtual Surround
• Settings: On , Off (default)
Switch on Virtual Surround to enjoy realistic
surround sound effects from just two speakers.
Tip
• DV-393 and DV-490V: You can also use the
SURROUND button on the remote control
to switch Virtual Surround on.
Note
• Virtual Surround doesn’t work with DTS,
through either the analog or digital
outputs.
• 96 kHz linear PCM audio is automatically
downsampled to 48 kHz if Virtual Surround
is switched on.
Audio Settings
Audio Settings
Equalizer
Virtual Surround
Audio DRC
Dialog
On
Off
DV393S_ASIA_EN.book 36 ページ ２００６年５月１２日 金曜日 午後７時５０分