Philips NORELCO 85XL 3 User Manual
Page 16
16
4
Remove and clean one set of heads at a time.
5
Separate the cutter from the head and rinse clean under
hot water.
Do not clean the razor heads with the brush.
Do not clean more than one cutter and head at a time,
since they are all matching sets. If you accidentally
interchange the cutters and heads, it could take several
weeks before optimal shaving performance is restored.
6
Replace the set back into the Head Assembly in such a
way that the sides with the little holes point to the
middle of the shaving unit.
Make sure that the two pointy edges of the head fit
exactly into the recesses.
7
Repeat the process for the other two sets of razor
heads.
8
Replace the frame.
9
Press down and turn wheel clockwise until it locks into
place.
10
Replace the Razor Head Assembly back on razor.
If the razor heads have been properly inserted, a shiny
circle is visible in the middle of the razor head assembly.