Philips CD SOUNDMACHINE AZ2060 - Manual (Page 3)

English CONTROLS
MAINS SUPPLY
Whenever convenient, use the mains supply to con-
serve battery life. Make sure you remove the power
plug from the set and wall socket before inserting
batteries.
Batteries (not included)
¥ Insert 6 batteries, type R-20, UM-1 or D-cells,
(preferably alkaline) with the correct polarity.
Remote control (See A)
¥ Insert 2 batteries, type AAA, R03 or UM4 (prefer-
ably alkaline).
Incorrect use of batteries can cause electrolyte leak-
age and will corrode the compartment or cause the
batteries to burst.
¥ Do not mix battery types: e.g. alkaline with carbon
zinc. Only use batteries of the same type for the
set.
• When inserting new batteries, do not try to mix
old batteries with the new ones.
¥ Batteries contain chemical substances, so
they should be disposed of properly.
Using AC Mains
1 Check if the mains supply, as shown on the type
plate located on the bottom of the set, corre-
sponds to your local mains supply. If it does not,
consult your dealer or service centre.
2 If your set is equipped with a voltage selector,
adjust the selector so that it matches with the
local mains.
3 Connect the mains lead to the wall socket.
4 To disconnect the mains supply, unplug the set
from the wall socket.
Auto-Standby mode
When a CD has reached the end of playback and
remains in the stop position for more than
15 minutes, the set will switch off automatically to
save mains.
When in pause position for 5 minutes, the CD play-
back will stop automatically. 15 minutes later, the set
switches off.
The type plate is located on the bottom of the
set.
BASIC FUNCTIONS
Switching on and off and selecting function
1 Press STANDBY y on the set to switch on.
2 Press Source selector once or more to select:
CD ,
TUNER , AUX or TAPE function.
3 Press y to switch off the set.
Helpful hints:
– To change from
TAPE to CD , TUNER or AUX function,
or when you are switching off the set: first, make
sure you press the tape STOP
9 key to end play-
back and all the cassette keys are released.
– The tone, sound settings, tuner presets and the
volume level (up to a maximum volume level of 20)
will be retained in the set’s memory.
Volume adjustment
¥ Adjust the volume with the VOLUME control.
™ Display shows the volume level and a number
from 0-32. (See 2)
Bass adjustment
There are three DBB (Dynamic Bass Boost) options:
—Off: no bass enhancement
—DBB1: moderate bass enhancement
—DBB2: strong bass enhancement
¥ Press DBB Selector once or more to select your
option.
™DBB1,2 appears if DBB is activated.
SUPPLIED ACCESSORIES
— AC mains lead
TOP AND FRONT PANELS (See 1)
1 p — 3.5 mm stereo headphone socket
Helpful hints: The speakers will be muted when
headphones are connected to the set.
2 AUX — 3.5 mm LINE-IN jack for external audio
appliance
3 STANDBYy — power on/ off switch
4 Source selector — selects CD/ TUNER/ AUX/
TAPE function
5 IR Sensor — infrared sensor for remote control
6 Cassette recorder keys
RECORD 0 — starts recording
PLAY 1 — starts playback
SEARCH 5/6 — fast winds/rewinds tape
STOP/OPEN 9/
— opens the cassette compartment
— stops the tape
PAUSE
; — pauses playback or recording
7 OPEN•CLOSE - press to open/close CD door
8 DBB selector — Switches the bass enhancement
on / off
9 VOLUME — adjusts volume level
0 Band selector— selects wavebands
! Navigation controls
PRESET -, + — selects a preset tuner station
(down, up)
9 — stops CD playback;
— erases a CD programme
SEARCH ∞, § —
CD: — searches back and forward within a track;
— skips to the beginning of a current track/
previous/ later track
Tuner: tunes to radio stations (down, up).
MODE — selects different play modes:
e.g.
REPEAT or SHUFFLE (random) order
2; — starts or pauses CD playback
@ PROGRAM —
CD: programmes tracks and reviews the pro-
gramme;
Tuner: programmes preset radio stations
# Display — shows the status of the set
BACK PANEL
$ Telescopic aerial — improves FM reception
% AC MAINS — inlet for mains lead
^ Battery compartment — for 6 batteries,
type R-20, UM1 or D-cells
REMOTE CONTROL
1 VOLUME + , – — adjusts volume level (up, down)
2 SHUFFLE — plays all CD tracks in random order
3 2; — starts/ pauses CD playback
4 SEARCH 5, 6 — searches backwards/ forwards
within a track
5 PRESET 3,4 – — selects a preset radio station
(up, down)
6 TUNING ∞, § — tunes to tuner stations
(down, up)
7 9 — stops CD playback;
— erases a CD programme
8 ¡, ™ — skips to the beginning of a current track
previous/ subsequent track
9 REPEAT — repeats a track /programme/ entire CD
CAUTION
Use of controls or adjustments or performance of pro-
cedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
IMPORTANT!
For users in the U.K.: please follow the instructions on
the upper righthand-side.
BASIC FUNCTIONS