beautypg.com

Introduction / general safety advice, Included items, Technical data – Parkside PFSPS150 User Manual

Page 5: General safety advice, Your working area

background image

7

GB

Q

Included items

1 Electric paint spray gun
3 Nozzles* 1 x 0.6, 2 x 0.8 mm
3 Suction pressure valves*
2 Springs*
1 Cleaning nozzle
1 Nozzle extension
1 Measuring cup
1 Operating instructions
1 Booklet covering „warranty and service“

* 1 x prefitted

Technical data

Rated power:

150 W

Delivery capacity:

400 g / min (water)

Viscosity capacity:

max. 100 DIN-sec

Pressure:

max. 250 bar

Paint cup:

0.7 litre

Protection class:

II /

Noise and vibration data:
The sound pressure level (A-weighted) of the
device is typically 93.9 dB (A).
Uncertainty K=3 dB.
The sound level while working can exceed
106.9 dB (A).

Wear ear protection!

Weighted acceleration, typical: 6.5 m / s

2

WArNING!

The vibration level given in these

instructions has been measured in accordance with
a standardised measurement procedure and can
be used to compare devices.
Different uses of the device give rise to different
vibration levels and in many cases they may exceed
the values given in these instructions. In some cir-
cumstances it is easy to underestimate the vibration
load if the electrical power tool is used regularly.
Note: If you wish to make an accurate assessment
of the vibration loads experienced during a particular

period of working, you should also take into account
the intervening periods of time when the device is
switched off or is running but is not actually in use.
This can result in a much lower vibration load over
the whole of the period of working.

General safety advice

J

CAUTION! Please read all the instructions
and advice. Failure to observe the instructions
and advice given below may result in electric
shock, fire and/or serious injury.

MAKE SURE THAT YOU KEEP THESE INSTRUC-
TIONS AND SAFETY ADVICE IN A SAFE PLACE.

1. Your working area

a)

Keep your working area clean and
clutter-free.
Untidy or poorly lit working
areas can lead to accidents.

b)

Do not work with the device
in potentially explosive envi-
ronments in which there are

inflammable liquids, gases or dusts.
Electrical power tools create sparks which can
ignite dusts or fumes.

c)

Keep children and other peo-
ple away while you are op-
erating the electrical power

tool. Distractions can cause you to lose
control of the device.

Introduction / General safety advice