Philips MCD 700 - Manual (Page 2)

AC power cord
Speaker
(Right)
Speaker
(Left)
FM antenna
MW antenna
1
5
4
3
2
1
Speaker connection for MCL707
Connect the speakers to the SPEAKERS (8ohm) terminals with two speaker cables. Right speaker to " R " and
left speaker to " L ", red wire to " + " and silver wire to " – ".
For radio reception, connect the supplied MW loop antenna wires to the AM AERIAL jack.
Connect the serial port marked CONTROL CABLE at the rear of the DVD player to the same port at the
rear of the power amplifier with the supplied control cable.
Connect the VIDEO OUTPUT jack at the rear of the DVD player to the video input jack on the TV using the
supplied video cable (yellow).
Connect the power cord of the DVD system to the AC power outlet.
1
2
3
Tip
See the User Manual for other TV connection options.
4
5
Tip
It is unnecessary to connect the FM pigtail antenna since it
is fixed to the main unit.
MCD700 QUG_Eng-55 2005.5.18, 2:57 PM 2