Philips LX700 - Manual (Page 5)

5
English
Features
The LX700 Digital Home Cinema System creates the same
dynamic sound qualities that you find in full-fledged cinemas
and incorporates some of the best features in home theatre
technology.
Features include:
Building-in DTS and Dolby® Digital decoder,
supporting Dolby® ProLogic II and virtual
surround
Use the Home Cinema Audio System for a movie-theatre
surround sound experience.
Additional Component Connections
Lets you connect other audio and audio/visual components
to the Receiver so you can use the system’s surround sound
speakers.
Night Mode
Lets you compress the dynamic range, reducing the
difference in volume between different sounds in Dolby
Digital mode.
Sleep Timer
Enables the system to switch to standby mode automatically
at a preset time.
Supplied Accessories
– a remote control with two AA batteries.
– a MW loop antenna and an FM wire antenna.
– audio connection cables.
– five satellite speakers, including five speaker cables.
– a passive subwoofer, including a speaker cable.
– a power cable for connection with the main unit.
– 4 speaker brackets and 4 screws,
– 4 mini speaker stands and 8 screws
– Instruction booklet
– Gettng Started Guide
If any item is damaged or missing, please contact your retailer
or Philips dealer.
Environmental information
All unnecessary packaging has been omitted. We have tried
to make the packaging easy to separate into three materials:
cardboard (box), polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet).
Your system consists of materials which can be recycled and
reused if disassembled by a specialized company. Please
observe the local regulations regarding the disposal of
packaging materials, exhausted batteries and old equipment.
Installation
If you have stacked the components of your system, the
receiver must be on top. Place the receiver on a flat, hard,
stable surface. Do not cover any vents and leave 10 cm
above and 10 cm left and right of the receiver free for
ventilation.
Maintenance
● Do not expose the receiver or
batteries to humidity, rain, sand or
excessive heat (caused by heating
equipment or direct sunlight).
Always keep the disc tray closed
to avoid dust on the lens.
● Do not use solvents such as
benzene, thinner, commercially
available cleaners, anti-static spray
intended for colour discs.
Introduction and General Information
I NTRODUCTION AND G ENERAL I NFORMATION