Planar PQ191M - Manual (Page 13)

A12
Specifications
NOTE
Information in this document is subject to change without notice.
Flat Panel Active matrix-TFT LCD
19 inch diag viewable, Anti-Glare coating, 0.29 mm pixel pitch
Horizontal Viewing Angle: -85 to +85 deg typical
Vertical Viewing Angle: -85 to 85 deg typical
Horizontal Freq. Analog:30 - 83kHz (Automatic)
Digital:30 - 71kHz (Automatic)
Vertical Freq. 56 - 75Hz (Automatic)
Input Form Separate TTL, Positive/Negative
Composite TTL Positive/Negative
SOG (Sync On Green)
Digital
Signal Input 15 pin D-Sub Connector
DVI - I connector (Digital/Analog)
Input Form RGB Analog (0.7Vp-p/75ohm), Digital
Max DVI Digital/Analog:VESA 1280 x 1024@60Hz
D-sub Analog:VESA 1280 x 1024@75Hz
Recommend VESA 1280 x 1024@60Hz
DDC 2B
Normal : 43W
Stand-by/Suspend
≤
3W
DPMS Off
≤
3W
Width 41.28 cm / 16.25 inches
Height 43.50 cm / 17.13 inches
Depth 22.30 cm / 8.78 inches
Net 7.20 kg (15.87lbs)
Tilt -5˚~30˚
Swivel 360˚
AC 100-240V~ 50/60Hz 1.0A
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity
5 % to 95 % non-Condensing
300 cd/m2 typical
700:1 typical
Wall-outlet type
UL, cUL, FCC
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
&Weight
(with tilt/ swivel
stand)
Tilt/Swivel Range
Power Input
Environmental
Conditions
Brightness
Contrast
Power cord
Regulations