beautypg.com

Installation audio connections – Philips HC350 User Manual

Page 7

background image

Headphone battery
replacement (figure 3)

IMPORTANT
Use only rechargeable LR03/AAA NiCd
batteries (preferably Philips).

Do not use NiMH batteries or

alkaline batteries as these may damage
your FM wireless system!

1 Remove the earcushions.

2 Take out the batteries and dispose of them

properly.

3 Insert new batteries. Only use LR03/AAA

NiCd batteries (preferably Philips).

4 Make sure the batteries are correctly

inserted as indicated by the engraved
symbols in the battery compartment.

5 Put the earcushions back on the earshell.

IMPORTANT
Before using the FM headphone for the
first time, please ensure that the
batteries are fully charged for about
16 hours.This will guarantee a longer
operating lifetime of the batteries.

Connecting the FM transmitter to a
headphone output of an audio
source (figure 4)

1 Connect the 3.5mm stereo plug of the

stereo audio cable to the headphone
output of an audio source, such as TV, HiFi
or PC.
– In case your audio source has a 6.3mm

headphone output, use the supplied
3.5mm to 6.3 mm stereo adapter plug.

2 Switch on your audio source and carefully

increase the volume of the audio source.
The red power indication LED of the
transmitter lights up if receiving an audio
signal.

3 Switch on the headphone.You may hear a

hissing sound through the headphone if the
headphone is not yet properly tuned to the
transmitter.

4 To tune, turn the tuning wheel until the

signal is at its clearest.

5 Adjust the volume to the desired level with

the headphone volume control.

Basic operation
When the FM transmitter is connected to a
headphone output of an audio source.

1 Switch on your audio source and carefully

increase the volume of the audio source.
The red power indication LED of the
transmitter lights up if receiving an audio
signal.

2 Switch on the headphone.You may hear a

hissing sound through the headphone if the
headphone is not yet properly tuned to the
transmitter.

3 To tune, turn the tuning wheel until the

signal is at its clearest.

4 Adjust the volume to the desired level with

the headphone volume control.

Installation

Audio Connections

7

English

XP SBC HC 350.1 21-06-2001 09:51 Pagina 7