Pantech C3 - Manual (Page 77)

Press the [Menu] Soft key, select 9.Settings, and then select
3.Call.
Call Forward
This function allows you to divert incoming calls to another
phone number.
Press the [Menu] Soft key, select 9.Settings, select 3.Call,
and then select 1.Call Forward.
Choose Forward Always, When Busy, On No Answer,
When not Found, or Cancel All, all of which divert the call
as required.
Because call forwarding is a network service, you must
contact your service provider to verify the availability of the
service.
Forward Always
This function forwards all calls without regard to the
condition. It does not even matter if the mobile phone is
switched on or off.
•
Activate: Sets Call Forwarding Always.
• Deactivate: Cancels Call Forwarding Always.
• Status: Informs the setup condition.
• By Service: Sets up Call Forwarding Always for each
service (All Services, Voice calls, Data and Fax).
When Busy
This function forwards only those calls that receive a busy
connection or that otherwise would have returned the busy
indication to the caller.
•
Activate: Sets up Call Forwarding When Busy.
• Deactivate: Cancels the preset Call Forwarding When
Busy.
• Status: Informs the setup condition.
• By Service: Sets up Call Forwarding When Busy for each
service (All Services, Voice calls, Data and Fax)
On No Answer
This function forwards the calls that are not answered or not
picked up by the called party within a specific time.
•
Activate: Sets up Call Forwarding On No Answer.
• Deactivate: Cancels the preset Call Forwarding On No
Answer.
• Status: Informs the setup condition.
• By Service: Sets up Call Forwarding On No Answer for
each service (All Services, Voice calls, Data and Fax)
When not Found
If the mobile subscriber is currently out of the GSM network
or decides to switch off the mobile phone, this service
Settings
76
060921_C3_EN-ºˆ¡§.indd 76 2006.9.21 1:58:59 PM