Phase Technology WL-RX SUB User Manual
Page 4
o Turn off or relocate any equipment that might be operating on the 2.4 GHz band.
o Check the distance between the transmitter and receiver and move closer if pos-
sible. The audio cables can be extended if necessary for better placement positioning.
o Building construction or large metal objects can reduce the strength of the radio
signals. Concrete and steel do not pass radio waves well. Try relocating the receiver or
transmitter to improve the signal strength.
If you have any question about this Phase Technology wireless product or other problems
that these trouble shooting tips do not solve, please contact your Phase Technology dealer
or our customer service department at (888) PHASE-TK.
SPECIFICATIONS
WL-RX SUB
Frequency Band
2.4 GHz
Effective Indoor Range
>150 feet (depends on conditions)
Effective Range line-of-sight
>200 feet (depends on conditions)
Reception Mode
Uncompressed wireless streaming digital audio
Audio Interface
18” shielded RCA cable
RF channels
3 (user selectable)
Frequency Response
20 Hz - 20 kHz
Power Supply
5 volt DC
Dimensions
3.25” x 1.875” x 0.625”
WL-3TX
Frequency Band
2.4 GHz
Effective Indoor Range
>150 feet (depends on conditions)
Effective Range Line-of-Sight
>200 feet (depends on conditions)
Reception Mode
Uncompressed wireless streaming digital audio
Audio Channels
Left, Right, and Subwoofer
Audio Interface
RCA jacks
RF Channels
3 (user selectable)
Frequency Response
20 Hz - 20 kHz
Power Supply
5 volt DC
Dimensions
1.125” (H) x 7.125” (W) x 6.125” (D)
WARRANTY
Phase Technology warrants its electronics to be free from defects in material and workman-
ship for a period of three (3) years for electronics products. Purchase must be made from an
authorized Phase Technology dealer.
This warranty does not cover service or parts to repair damage caused by misuse, abuse,
damage while in transit, alterations, unauthorized repairs, failure to follow instructions, fire,
flood, or any other cause beyond the reasonable control of Phase Technology. Cosmetic
defects must be brought to the attention of your dealer immediately after purchase. This
warranty will be void if the products’ serial number has been altered or removed.
To obtain warranty service, defective product must be shipped in its original carton or equiv-
alent together with original invoice or bill of sale, insured and prepaid to your authorized
Phase Technology dealer or the factory when warranty service is requested.
If you choose to return the defective product to the factory you must first call us at (888)
phase-tk to obtain a Return Authorization number prior to shipping. Product repaired under
this warranty will be returned to you freight collect.
Phase Technology will not pay for loss of time, inconvenience, loss of use, or property dam-
age caused by your product or its failure to work, or any other incidental or consequential
damages. Some states do not allow the exclusion or limitation of consequential damages,
so the above limitation may not apply to you.
Phase Technology Corporation
8650 College Boulevard
Overland Park, KS 66210
(888) PHASE-TK Telephone
(913) 663-9790 Fax
page 4
T E
C H
N O
L O G Y
R
Phase Technology 8650 College Boulevard
Overland Park, Kansas 66210 (866) 663-9770
www.phasetech.com
An MSE Audio Group company www.mseaudio.com