Pioneer DEH-14 - Manual (Page 10)

4 To perform fast forward or reverse, press
and hold
2 or 3.
5 To skip back or forward to another track,
press
2 or 3.
Pressing
3 skips to the start of the next track.
Pressing
2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• The built-in CD player plays one, standard,
12-cm or 8-cm (single) CD at a time. Do not
use an adapter when playing 8-cm CDs.
• Do not insert anything other than a CD into
the CD loading slot.
• If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
CD EJECT to eject the disc, and check
the disc for damage before inserting the disc
again.
• If the built-in CD player does not operate prop-
erly, an error message such as ERR 14 may be
displayed. Refer to Understanding built-in CD
player error messages on page 15.
Playing tracks in a random order
Random play lets you play back tracks on the
CD in a random order.
1 Press 4 to turn random play on.
RDM appears in the display. Tracks will play in a
random order.
2 Press 4 to turn random play off.
Tracks will continue to play in order.
Repeating play
Repeat play lets you hear the same track over
again.
1 Press 5 to turn repeat play on.
RPT appears in the display. The track presently
playing will play and then repeat.
2 Press 5 to turn repeat play off.
The track presently playing will continue to play
and then play the next track.
Note
• If you perform track search or fast
forward/reverse, repeat play is automatically
cancelled.
Pausing CD playback
Pause lets you temporarily stop playback of the
CD.
1 Press 6 to turn pause on.
PAUSE appears in the display. Play of the cur-
rent track pauses.
2 Press 6 to turn pause off.
Play will resume at the same point that you
turned pause on.
Built-in CD player
En 9