PYLE Audio PLD70BT User Manual

Page 5

-4-

Disc Notes

Preparing New Discs with
Spots

Rough

A new disc may have rough edges on
its inside and outside edges. If a disc
with rough edges is used, the proper
setting will not be performed and the
player will not play the disc. Therefore,
remove the r o u g h e d g e s i n a d v a n c e
by using a ball point pen or pencil as
shown on the right. To r e m o v e t h e
rough edges, press the s i d e o f t h e pen
or pencil against the inside and outside
edges of the disc.

Rough spots
on
outside edge

Ball point pen
or pencil

Rough spots
on inside
edge

Do not touch
the
underside
of the disc

Do not
bend

Wipe the disc from
center
toward the outside
edge

Label side
up

Disc Cleaning

Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.

Handling and Cleaning

Dirt, dust, scratches and warping disc

will cause misoperation.

Do not place stickers or make
scratches on discs.
Do not warp discs.

A disc should always be kept in its

case when not in use to prevent from
damaging.
Do not place discs in the following
places:
1.Direct sunlight
2.Dirty, dusty and damp areas
3.Near car heaters
4.On the seats or dashboard

Discs which cannot be played
with this player

DVD-RAM
CDV
CDG

Note:

A disc may become somewhat scratched
(although not enough to make it

unusable) depending on your handle it
and conditions in the usage environment.
Note these scratches are not an
indication of any problem with the player.

Disc formats supported by this
player

DVD

VCD

MP3

Audio and Video
Disc size 12 cm

Audio
Disc size 12 cm