Pentair 710 User Manual
Page 9
5
Prowler
™
710 Installation and User’s Guide
Setting up your Prowler™ 710 Cleaner
Your new cleaner consists of two main parts:
A. Power Supply (Transformer) with Two-Hour Automatic Shut-Off,
Figure 1
.
Fuse Holder
Forward/Reverse Timer Control Dial
Power Supply Cord
Socket (for Floating Cable)
Power (ON/OFF) Switch
Reset Button
NOTE:
The Power Supply appearance may vary and features may be located in different positions then what is shown above.
Rear view
Front view
6
Figure 1.
B. Pool Cleaner with Floating Cable,
Figure 2
.
Floating Cable
Hydroscrub Tube*
(Jet Nozzle)
Fixed Axle Housing
Jet Valve Housing
Turning Wheel Axle Housing
Screw for Valve Extension
Wheel(s)
Valve Extension
(Port)
Handle
* NOTE:
The Hydroscrub Tubes are hidden within the cleaner’s body.
Figure 2.
Close Up
8
7
9
6
5
3
4
1
2