Philips DC315/05 - Manual (Page 16)

6 Other features
Set the alarm timer
You can set two alarms which go off at different time.
1
Ensure that you have set the clock correctly.
2
Press and hold ALM 1 or ALM 2 for 2 seconds.
»
or and hour digits begin to blink.
3
Press TUNING +/- repeatedly to set the hour.
4
Press ALM 1 or ALM 2 to confirm.
»
or and minute digits begin to blink.
5
Repeat steps 3-4 to set the minute.
6
Repeat steps 3-4 to select whether to ring alarm on weekdays
or at weekend.
7
Repeat steps 3-4 to select an alarm sound source.
8
Repeat steps 3-4 to set the alarm volume.
Activate and deactivate the alarm timer
1
Press ALM 1 or ALM 2 repeatedly to activate or deactivate the
timer.
If the timer is activated,
»
or is displayed.
If the timer is deactivated,
»
or disappears.
Repeat alarm
1
When the alarm rings, press REPEAT ALARM/BRIGHTNESS
CONTROL.
The alarm repeats ringing minutes later.
»