Powermatic Wood Shaper 29 - Manual (Page 13)

13
FIGURE 27
MAINTENANCE
Apply a drop of light machine oil occasionally on the
ledge and wall of the table opening to facilitate the
changing of table inserts.
The bearings in the motor are sealed for life and do
not require lubrication.
The main shaft should be lubricated with grease regu-
larly after continuous running for 30 days. See chart.
FIGURE 28
Item Position Interval Suitable types of oil Fig. No.
A Table Opening Frequently Machine Oil 28
B Connection Plate Frequently Machine Oil 29
C Main Shaft Monthly Shell Alvania Grease R2 28