Planar PQ170 - Manual (Page 14)

A13
Specifications
NOTE
Information in this document is subject to change without notice.
Flat Panel Active matrix-TFT LCD
17 inch diag viewable, Anti-Glare coating, 0.26 mm pixel pitch
Horizontal Viewing Angle: -70 to +70 deg typical
Vertical Viewing Angle: -60 to +60 deg typical
Horizontal Freq. 30 - 83kHz (Automatic)
Vertical Freq. 56 - 75Hz (Automatic)
Input Form Separate TTL, Positive/Negative
Composite TTL Positive/Negative
SOG (Sync On Green)
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7Vp-p/75ohm)
Max VESA 1280 x 1024@75Hz
Recommend VESA 1280 x 1024@60Hz
DDC 2B
Normal : 40W
Stand-by/Suspend
≤ 2W
DPMS Off
≤ 2W
Full Up Position Folded Position
Width 38.6 cm / 15.20 inches 38.6 cm / 15.20 inches
Height 37.2 cm / 14.65 inches 40.2 cm / 15.83 inches
Depth 15.2 cm / 5.98 inches 6.6 cm / 2.60 inches
Net 4.3 kg (9.48 lbs)
Tilt 0˚ to 25˚
AC 100-240V~ 50/60Hz 1.0A
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity
5 % to 95 % non-Condensing
250 cd/m2 typical
400:1 typical
Wall-outlet type
UL, cUL, FCC
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
&Weight
(with tilt stand)
Tilt Range
Power Input
Environmental
Conditions
Brightness
Contrast
Power cord
Regulations