Audio settings (cont’d) 39, Press the setup button to remove the menu – Philips DVD501AT User Manual
Page 39
Audio Settings (cont’d) 39
4
To change the PCM, DOLBY DIGITAL, or DTS settings,
press the corresponding Number button to select the
desired item, then press the Number button to choose
the setting (i.e. ON or OFF).
SETUP/AUDIO
PCM
1. 48kHz
2. 96kHz
•
Audio signals are converted to 48 kHz/16 bit signals
when playing a DVD recorded with high sound quality
(48 kHz/20 bit/24 bit, 96 kHz).
•
Sound is reproduced at 96 kHz if a DVD is recorded
with high sound quality. If you are playing 48 kHz discs
or if 4:3 LETTER BOX is selected, sound is reproduced
at 48 kHz.
Enter, Back Exit
5
4
SETUP
MODE
DISPLAY
CLEAR
+10
3
6
9
0
2
5
8
1
4
7
SKIP
SEARCH MODE
TITLE
ENTER
POWER
MENU
STOP
PLAY
FWD
REV
RETURN
A-B
REPEAT
PAUSE/STILL
AUDIO
SUB TITLE
ANGLE
OPEN/
CLOSE
SETUP/AUDIO
DOLBY DIGITAL
1. OFF
2. ON
•
Select ON when a Dolby Digital decoder is used.
Enter, Back Exit
SETUP/AUDIO
DTS
1. OFF
2. ON
•
Select ON when a DTS decoder is used.
Enter, Back Exit
5
Press the SETUP button to remove the menu.