Peavey EVH Wolfgang - Manual (Page 6)

Volume ( 2 )
The volume knob controls the total signal delivered
from both pickups. Rotating clockwise will increase
volume; rotating counterclockwise will reduce vol-
ume.
Output Jack ( 3 )
The output jack accepts standard guitar patch cords.
(We recommend high-quality Peavey “shielded” patch
cords.)
A
djustments
Your instrument has been carefully adjusted at the Peavey
factory for accurate intonation and playing ease. However,
your playing style and requirements may necessitate addi-
tional adjustments. These should be made by your autho-
rized Peavey dealer; but with a little care and by closely
adhering to the following instructions, you may attempt
these adjustments yourself.
Please read the instructions thoroughly before attempting
any adjustments
.
Torsion Rod ( 1 )
All guitar necks have a slight amount
of bow to keep the strings from
“buzzing” on the frets. This instrument
features an easy access torsion rod
adjustment wheel located at the end of
the neck. This wheel can be adjusted
with a hex wrench or small screwdriv-
er. Just insert the tool into the adjust-
ment wheel and rotate accordingly.
1. Tune the instrument to
standard (A-440) pitch.
2. Fret the sixth string (E) at the
first and last frets.
3. Check for clearance between the string and the
eighth fret.
6
1