Philips AW5000 - Manual (Page 12)

10 EN
4
Tap Next on the above app screen, and
then read how to proceed with network
setup.
5
As instructed, exit the app, and then select
Philips_Install from the list of available
Wi-Fi networks.
6
Make sure that your iOS device is
connected to Philips_Install, and then go
back to Philips AirStudio.
7
Wait until Speaker found appears at the
bottom on the above app screen.
» After a short while, a password input
box appears automatically.
8
Enter the password of your home Wi-Fi
network, tap Done to finish input, and then
tap Next.
* If your Wi-Fi password contains such special
characters as #/:/;/', you need to change your
password.