Pacific Digital MF-810S User Manual

Page 10

Page 7

Warning! Plugging the North American plug into locations outside
of North America that use 240 VAC 50 Hz will damage unit and void
warranty. European models are available for 220V-240V countries.

Pacific Digital offers an international external power supply for use
outside of North America.

4.5

Using the Removable Stand

The removable stand is designed to properly support the
MemoryFrame in either portrait (vertical) or landscape (horizontal)
orientations. The stand is designed to support MemoryFrame on flat
surfaces only.

Insert the Stand into the rear of the MemoryFrame, and rotate to the
orientation that you prefer, and set the MemoryFrame on a flat
surface. See Figure 2 below. To wall-mount the unit, remove the
stand by rotating out.

Figure 2 – Removable Stand

4.6 Power-on

Initialization

Move the MemoryFrame’s Power Switch to the “ON” position to
turn on the MemoryFrame.

Important Note: In the power-on sequence of the MemoryFrame, its
initialization screen will take a few moments to appear. The entire
power-on sequence may take several minutes and you will be unable
to use the push-button menu system until the initialization screen is
replaced by the first photo appearing on the screen.