Philips AVENT SCH540 - Manual (Page 15)

to reassemble the soother thermometer:
1 Align the blocks of the measurement unit with the matching slots
in the back of the shield.
2 Insert the measurement unit into the shield. Make sure that the tip
of the probe goes into the pocket inside the teat. (Fig. 3)
3 Turn the measurement unit 90° clockwise to lock it into position.
Cleaning the flexible-tip thermometer
Do not sterilise or boil the thermometer.
Do not clean the flexible-tip thermometer in the dishwasher, in the
microwave or in a microwave steriliser.
1 Clean the flexible-tip thermometer with a soft damp cloth.
Cleaning the regular soother
Before first use, wash and rinse the soother thoroughly.
Clean the soother before each use.
1 Sterilise or boil the soother.
The soother and protection cap are suitable for all forms of sterilisation.
Sterilise using a Philips AVENT Steam Steriliser or boil in water for 5
minutes.
If you use a sterilising solution, follow the instructions on the package. Do
not leave the soother in the sterilising solution for longer than
recommended, as this may weaken the teat.
Wash your hands thoroughly and ensure surfaces are clean before
contact with sterilised components.
2 After sterilisation, let the soother cool down for 5 minutes
and squeeze out any trapped water from the teat. This is to
ensure hygiene.
Cleaning the storage box
Do not sterilise the storage box.
EngliSH 15