Philips PET731/12 - Manual (Page 14)

4 Charging the units
4.1 Charge the DVD player
Plug in the AC/DC adaptor
• The RED LED indicates that
charging is in progress.
• When the set is not in use,
it will take about 4 hours
to fully charge it.
The RED LED will turn off when the set is fully charged.
Tips:
* You can operate the DVD player while charging. However, it takes
longer time to fully charge the battery.
* When the low battery icon appears on the screen, please charge
the player.
* Rechargeable batteries have a limited number of charge cycles
and may eventually need to be replaced. Battery life and number
of charge cycles vary by use and settings.
4.2 Powering your remote control
1 Open the battery compartment. Remove the
protective plastic tab (first time users only).
2 Insert 1 x lithium 3V battery, type CR2025, then close
the compartment.