Chapter 2 preparations & installation, Physical installation requirement – Planet Technology VIP-154T User Manual
Page 13
2
Chapter 2
Preparations & Installation
Physical Installation Requirement
This chapter illustrates basic installation of IP Phone
• Network cables. Use standard 10/100Base-TX network (UTP) cables with RJ45 connectors.
• TCP/IP protocol must be installed on all PCs.
For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem
Administration Interface
PLANET IP Phone provides GUI (Web based, Graphical User Interface) for machine management and
administration.
Web configuration access
To start IP Phone web configuration, you must have one of these web browsers installed on computer
for management
•
Netscape Communicator 4.03 or higher
•
Microsoft Internet Explorer 4.01 or higher with Java support
Default IP address of IP Phone is 192.168.0.1. You may now open your web browser, and insert
in the address bar of your web browser to logon IP Phone web configuration page.
13