Pentair INTELLIFLO 100 - Manual (Page 8)

2
IntelliFlo 4 Installation and User’s Guide
Features
• Adjusts to various pool sizes
• Prevents thermal overload
• Detects and prevents damage from under and over voltage conditions
• Protects against freezing
• Communicates with a Pentair IntelliTouch, EasyTouch and IntelliComm system via a two-wire
connection
• Easy to use operator control panel
• Operator control panel buttons for speed control
• Built-in strainer pot and volute
• Ultra energy-efficient TEFC Square Flange Motor
• Compatibility with most cleaning systems, filters, and jet action spas
• Driver assembly features permanent magnet synchronous motor
• Heavy-duty, durable construction designed for long life
• UL approval
IntelliFlo 4 Motor Assembly
The IntelliFlo three-phase six-pole motor operates at 3400 RPM (at 92% efficiency) and 1000 RPM (at
90%). The motor assembly is continually cooled by an external fan. Dual seals on the motor shaft and at the
fan assembly seal the entire motor from any moisture from entering the motor assembly. For added
protection, a slinger located in front of the main shaft seal assists in slinging water away from the shaft
opening in the flange.
Drive assembly and
electronics enclosure
IntelliFlo 4 Motor Assembly
Motor fan cover
Control panel cover
Communication port for
connection to IntelliTouch,
EasyTouch or IntelliComm
system via two-wire RS-485
cable0
Motor assembly