Rear panel – Peavey Mixer User Manual

Page 32

Group Outputs
These Group Outputs feature 1/4” TRS balanced jacks and provide output signal from the Groups. The
output level is set by the Group Level faders (26).

Left/Right Outputs
The Left/Right Outputs feature two 1⁄4” TRS Z-balanced jacks and two fully balanced XLR outputs. The
1⁄4” outputs can be used with Tip‚ Ring, Sleeve (TRS) balanced or Tip, Sleeve (TS) unbalanced connec-
tors. The output level is set by the Master Level faders (40). Both outputs can be used simultaneously.

AUX 1 - 6 Outputs
These AUX Outputs feature 1/4” TRS balanced jacks and provide signal from the Auxiliary Outputs. The
output level is set by the AUX Level controls (19, 20).

Effects 2 Patch Jack
This 1/4” TRS jack allows the internal Effects 2 processor to be patched to an Input or Group Insert or
to an external device. The tip carries the input (return) signal to the compressor and the ring carries the
output (send).

EFX 2 Return Jacks
These 1/4” high-impedance balanced inputs can be used as stereo or individual returns. Designed for
effects return, they can also be used as additional stereo inputs. The L/Mono input provides signal to
both inputs if no connector is attached to the Right jack. The tip is the positive input for both balanced
and unbalanced use.

Media In Jacks
The Media Input jacks are set up for a +4 dBu input from a stereo audio media source. The signal feeds
the Media In level control (34).

Record Output Jacks
The output jacks can provide a +4 dBu output signal to a stereo recording device. The output level is
controlled by the Record Output level control (36).

USB Memory Connector
Use this A-type USB connector to plug in a removable data storage device to read or write MP3-
formatted files.

USB Computer Connector
Use this B-type USB connector to connect with a computer.

Rear Panel