Poulan 183384 User Manual
Page 4
4
CONGRATULATIONS on your purchase of a new tractor. It
has been designed, engineered and manufactured to give
you the best possible dependability and performance.
Should you experience any problem you cannot easily
remedy, please contact your nearest authorized service
center/department. We have competent, well-trained tech-
nicians and the proper tools to service or repair this tractor.
Please read and retain this manual. The instructions will
enable you to assemble and maintain your tractor properly.
Always observe the “SAFETY RULES”.
CUSTOMER RESPONSIBILITIES
•
Read and observe the safety rules.
•
Follow a regular schedule in maintaining, caring for and
using your tractor.
•
Follow the instructions under “Customer Responsibili-
ties” and “Storage” sections of this owner’s manual.
WARNING: This tractor is equipped with an internal com-
bustion engine and should not be used on or near any
unimproved forest-covered, brush-covered or grass-cov-
ered land unless the engine’s exhaust system is equipped
with a spark arrester meeting applicable local or state laws
(if any). If a spark arrester is used, it should be maintained
in effective working order by the operator.
A spark arrester for the muffler is available through your
nearest authorized service center/department (See REPAIR
PARTS section of this manual).
In the state of California the above is required by law (Section
4442 of the California Public Resources Code). Other states
may have similar laws. Federal laws apply on federal lands.
GASOLINE CAPACITY
2.00 GALLONS
AND TYPE:
UNLEADED REGULAR
OIL TYPE (API-SF-SJ):
SAE 30 (above 32°F)
SAE 5W-30 (below 32°F)
OIL CAPACITY:
W/ FILTER:
4.0 PINTS
W/O FILTER: 3.75 PINTS
SPARK PLUG:
CHAMPION RC12YC
(GAP: .040")
GROUND SPEED (MPH):
FORWARD:
1st
1.2
2nd
1.5
3rd
2.4
4th
3.5
5th
4.8
6th
5.3
REVERSE:
1.5
TIRE PRESSURE:
FRONT:
14 PSI
REAR:
10 PSI
CHARGING
16 Amps @ 3600 RPM
BATTERY:
AMP/HR:
35
MIN. CCA:
280
CASE SIZE:
U1R
BLADE BOLT TORQUE:
27-35 FT. LBS.
PRODUCT SPECIFICATIONS
TABLE OF CONTENTS
SAFETY RULES ........................................................ 2-3
PRODUCT SPECIFICATIONS ....................................... 4
CUSTOMER RESPONSIBILITIES ...................... 4, 14-17
ASSEMBLY ................................................................ 6-8
OPERATION ............................................................. 9-13
MAINTENANCE SCHEDULE ....................................... 14
SERVICE AND ADJUSTMENTS ............................. 18-23
STORAGE ................................................................... 24
TROUBLESHOOTING ............................................. 25-26
REPAIR PARTS ...................................................... 28-43
WARRANTY ................................................................ 45