Pacific Cycle SUMMERLAND 22-PS245 - Manual (Page 9)

2 Check the lock nut and bolt on the swing seat to
make sure that they are secure.
Part Ref. #: PSSH11, PSHW13
SLIDE ASSEMBLY
Required Parts:
Slide x1 Rail/Ladder Leg x2 Front Leg x1 Ladder Step x2 Link Bar x2
Proper
Placement:
Slide Assembly Correct Location Incorrect Location
Pre-Assembled Parts:
• The screws and bolts for the slide rail/ladder legs are inserted on the slide. They will need to be removed prior to
inserting the legs into the slide.
• The ladder steps should have screws and nuts installed. These will need to be removed prior to inserting the legs and
then reassembled with the head of the screw facing out.
Step Illustration
Instructions Hardware Reference
1 Remove the screws, washers, and lock nuts from
the holes in the slide.
Part Ref. #: PSHW24
9 ©2006 Pacific Cycle, Inc.