Philips SLV3100 - Manual (Page 5)

Connect TV2
DC 9V
1 2 3 4
1
TV2
AC
3
2
1
DC 9V
1
4 5
TV2
SLV3100 WIRELESS TVLINK RECEIVER
DC 9V
ON/OFF
2
B
Connect the power adapter
C
Check the operation of TV2
D
1. Plug the SCART cable of the receiver (B)
into the SCART port of TV2.
1. Switch on TV2.
2. Switch on the receiver (B).
3. Select the correct SCART input on TV2.
4. Point the remote control of the video
source to the receiver (B).
5. Operate the video source with its remote
control.
6. Check if TV2 shows the image of the video
source.
> The receiver is connected correctly.
1. Take the supplied power adapter (C).
2. Plug the connector into the DC 9V power
connector on the receiver (B).
3. Plug the adapter into the power outlet.