Philips SE 7450 - Manual (Page 17)

Getting started 15
5 Getting started
5.1 Install your phone
Before using the handset, the batteries
have to be installed and fully charged.
5.1.1 Install battery
See page 9.
5.1.2 Charge battery
Warning
The handset must be charged for at least
24 hours before using it for the first time.
When the battery level becomes low, an
empty battery icon is displayed on the
screen.
If the battery level becomes exceedingly
low, the phone automatically switches off
and any function in progress will not be
saved.
Place the handset on the charging cradle
of the base station. A melody is emitted
if the handset is placed correctly.
The battery icon
on the display
blinks during charge.
The battery icon
becomes
steady when the handset is fully
charged.
Note
Optimal battery life is reached after 3
cycles of complete charging (over 15
hours) and discharging, allowing
approximately 12 hours of talk-time and
150 hours of stand-by time.
1
2
3
SE7450_IFU_US_English.book Page 15 Monday, May 14, 2007 6:33 PM