Philips 14PV330/07 - Manual (Page 23)

f Press the OK button.
g Confirm the message on the screen with the OK button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
h Exit the menu with the TIMER s button.
E The programming information has been stored in a TIMER
block.
i Make sure that the cassette you have put in can be
recorded on.
Programming a recording with TELETEXT
With this function programming a recording will be
considerably easier. In TELETEXT you select the TV
programme you want record. All the required information for
recording will be transferred and stored in a TIMER block. You
can find more information on TELETEXT in the chapter ’TV SET
FUNCTIONS’.
a Select the TV channel you want to record from.
b Press TELETEXT e to activate TELETEXT. Your TV-VIDEO
Combi will now show TELETEXT for the TV channel you
have selected.
c With the number buttons 0-9 select the TELETEXT
programme guide page. This page can be stored as the
preferred page (see paragraph ’How to read TELETEXT’).
d Press TIMER s . ’ PLEASE WAIT ’ will briefly appear at
the bottom of the screen.
Next, a highlighted title line will appear.
D If ’
NO TIMER INFORMATION ON THIS
PAGE ’ appears, TELETEXT programming cannot be
used for the programme you have selected. In this
case, you should programme the recording as
described in the paragraph ’programming a
recording’.
e Use the BP r and AP q buttons to move the cursor
( h ) to the TV programme you want to record.
D If you want to cancel this function, press
TELETEXT e .
f Press OK . The timer menu will appear. The required
programming information has been stored in a TIMER
block. Please check the information.
TIMER PROGRAMMING
VPS
DATE PROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
г и Store:
« press OK
g For changing the TIMER information, select the entry field
with the
DSr or SqC button. Change the
information with the BP r or AP q button or with
the number buttons 0-9 .
D Under ’
REP. ’, use the BP r or AP q button to
select daily or weekly programming.
’
ONCE ’: Recording only once.
’ Mo-Fr ’: Recording from Monday to Friday.
’ Mo-Su ’: Recording from Monday to Sunday.
’ WEEKL ’: Recording every week on the same day.
D Under ’
VPS/PDC ’ switch ’VPS/PDC’ on or off with
the BP r or AP q button.
D Under ’
LP ’ select the recording speed ’SP’ or ’LP’
with the BP r or AP q button.
h When all information is correct, press OK .
i Confirm the message on the screen with OK .
A Timer recording can only start, if the set is not being
used for other video recorder functions (e.g. playback).
D The programming information has been stored in a
TIMER block.
j Exit the menu with the TIMER s button.
k Make sure that the cassette you have put in can be
recorded on.
21