Philips 8270XL - Manual (Page 10)

ENGLISH
◗ Do not apply pressure to combs. Do not touch
razor heads with hard objects as this may dent
or damage precision-made slotted combs.
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
◗ Unplug the charging stand. The charging stand
may be wiped clean using a damp cloth.
Cleaning: Razor Heads
The quickest and easiest way to clean the razor
heads is to rinse them after each use or at least
once a week with hot water: Water from the tap
should be on a hot setting, BUT BE CAREFUL
TO TEST WATER FIRST SO AS NOT TO BURN
OR SCALD HANDS.
◗ Regular cleaning guarantees better shaving
results.
◗ Do not immerse razor in water.
C
◗ While rinsing razor heads, water may drip
out of the base of razor. This is a normal
occurrence.
1 Always turn razor OFF, unplug from outlet
and remove cord from razor or charging
stand before cleaning.
C
2 Press the Razor Head Release Button, flip
open the Razor Head Assembly.
C
3 Clean inside razor heads and hair chamber
by running under hot water.
18 ENGLISH
C
4 Clean outside of Razor Head Assembly by
running under hot water.
5 Close the Razor Head Assembly and shake
off excess water.
6 Open Razor Head assembly again and
leave open to air dry.
NOTE: Do not wipe or dry the shaving heads
with a towel or tissue. This could damage the
shaving heads.
C
7 If the shaving unit becomes detached from
the razor, you can easily reattach it.
8 You may also clean the hair chamber
without water by using the supplied brush.
Once A Month: Razor Heads
Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1 Turn razor OFF, remove the charging plug
from the outlet and cord from the razor
or charging stand.
C
2 Press the razor head release button to
open the Razor Head Assembly.
19