Palm Series 3 - Manual (Page 18)

A D V A N C E D F E A T U R E S 14
U S E R G U I D E
Advanced features
Advanced features are available for
smartphones that support the hands-free
Bluetooth
® profile; this means you can use
your headset instead of your smartphone
to perform other tasks like redialing. Check
your smartphone’s instruction guide or
contact the manufacturer if you’re not sure
if your smartphone supports the hands-free
Bluetooth profile.
NOTE Most smartphones support the
hands-free profile.
Ignore an incoming call: When your
phone rings, press the Call control button
for two seconds to ignore the call. The call
goes to voicemail.
Redial the last number: To redial the last
number you called, quickly press the Call
control button twice. You hear a high tone
for each press.
Switch a call from phone to headset: To
switch a call from your phone to your
headset, press the Call control button for
two seconds or until you hear a tone.
Switch a call from headset to phone: To
switch a call from your headset to your
phone, press and hold the Call control
button for two seconds or until you hear a
tone.
NOTE The Wireless Headset does not
support call waiting. To use this feature,
use your phone’s controls to switch from
one call to the other. Refer to your phone’s
User Guide for instructions on how to use
call waiting with that device.
Use voice-activated dialing: Press and
hold the Call control button for two
seconds.
NOTE Depending on the model, your
smartphone may or may not support
voice-activated dialing through Bluetooth
wireless technology. If it is supported, you
must first set the voice tags on your
phone. For better recognition, record the
voice tags from your headset. Refer to your