Philips AJ100 - Manual (Page 2)

ENGLISH
Quick start as easy as ABC!
Step A
• Connect the supplied mains adapter to the set’s
7.5V DC jack and the plug into a wall outlet.
Step B
How to set the Clock & Alarm time
1. Check the radio is switched off.
2. Press SET TIME/ SET AL / SET AL .
3. Press and hold HR+/MIN+.
4. Press SET TIME/ SET AL / SET AL .
Step C
Selecting the Alarm mode
Press briefly:
• ALARM
once for radio
or /and
• ALARM once for buzzer.
Helpful hints:
– If you have selected ALARM , make sure you have
properly tuned to a station before turning off the set
(See TUNING TO RADIO STATIONS)
.
3 ways to switch off the alarm
• Either press briefly: ALARM RESET/SLEEP or
REPEAT ALARM/
BRIGHTNESS CONTROL
.
• Press ALARM or ALARM .
Radio
1. Press RADIO ON/OFF once to switch on the
radio.
2. Press TUNING +/- one second or more to tune
to your station.
• To store a preset, hold down briefly on a PRESET
button 1-5 until you hear a double beep.
DC 7.5V
A
R
B
C/3
3
Printed in China PDCC-JH-0703
AJ100_05-QSG 15/1/07, 15:58 2