Piega P Sub 4 - Manual (Page 11)

11
This is a widely used configuration for stereo mode, although it is not recommended for surround mode since there is a risk of
overloading with small satellite loudspeakers. With this configuration, the connection is made to the amplifier. Refer to the appropriate
manual for information about operation and connection options for your power amplifier.
PIEGA P SUB 4
Configuration example for stereo mode
Subwoofer mode via loudspeaker terminals
Connecting the System
Connection:
>Connect the P SUB 4 MKII cable to the amplifier terminal
marked SPEAKER (or similar)
>Likewise connect up the loudspeakers (parallel) to the terminal
marked SPEAKER (or similar)
>For this use two similar connection cables (not supplied)
Benefit:
Frequently used configuration in stereo mode
>Flexible positioning of components...!
HI LEVEL INPUT
Front
Speaker R
Front
Speaker L
Amplifier