Philips sensiflex HX2225 - Manual (Page 6)

C
3 Fill the water reservoir with water.
4 Put the water reservoir back onto the
base unit. Press it home properly.
C
5 Press the power button to switch the
Massage Jet on.
C
6 Push the slide on the handgrip upwards to
make the water start running.
When you use the Massage Jet for the first time,
let the appliance run until the water reservoir is
completely empty. Refill the water reservoir.
Tip:You may add mouthwash for extra freshness
to the water. After using mouthwash, fill the water
reservoir with clean, unmixed water and pump all
the water out of the appliance and into the
washbasin.
How to use the Massage Jet
C
1 You can adjust the water volume by
turning the control ring.
Tip: we advise you to use a low water volume
setting while you are getting accustomed to the
oral water jet and when you are troubled by gum
inflammation.
ENGLISH
6