Panasonic SV-AV30U - Manual (Page 61)

61
ª Playing back still pictures one by
one (P.Slide Show) ( l 32)
≥Playback time may take longer than usual
depending on the picture.
≥If the P. Slide show data is not recorded on
the Memory Card, the display reverts to
the index picture screen.
≥The time for the Slide show set by SD-
MovieStage Ver.2.0 is not applied to the
SD Multi AV Device.
ª Formatting the Memory Card
( l 33)
≥Normally, it is not necessary to format the
Memory Card.
≥If the Memory Card performance becomes
unstable (recording or playback fails, etc.),
try to format it.
≥If a message to prompt you to check the
Memory Card comes up, it will be
necessary to format it in order to use it on
the SD Multi AV Device.
≥By formatting, all data stored in the
Memory Card (e.g., still pictures, MPEG4
moving pictures, voice data, music data)
are erased.
≥Format the Memory Card on the SD Multi
AV Device or on the SD-Jukebox Ver.3.0
(supplied). A Memory Card formatted on a
machine other than the SD Multi AV
Device may not be used. A Memory Card
formatted on the SD Multi AV Device may
not be used on other machines. Format a
Memory Card on the machine on which it
is used.
≥Particularly for a Memory Card containing
music files, check in the Memory Card
using SD-Jukebox Ver.3.0, with which the
music files were recorded, then format it.
(For details, read the PDF-format manual
for SD-Jukebox Ver.3.0.)
≥Do not use the personal computer
(Explorer) to format it. Otherwise, it may
not be recognized by the SD Multi AV
Device.
≥If the write protection switch of the SD
Memory Card is set to [LOCK], data
cannot be erased.
≥When the Memory Card is formatted, the
files will be deleted, even if files are
locked.
≥As formatting erases all the data, save the
necessary data on a personal computer,
etc. beforehand.
≥Format may take a little time. Wait until the
Card Access Lamp goes out.
ª Fitting on the AV Cradle ( l 35)
≥To fit the SD Multi AV Device on the AV
Cradle, turn the SD Multi AV Device
[OFF].
≥When the SD Multi AV Device is
connected to the AV Cradle, the SD Multi
AV Device cannot record through-the-lens
images.
≥When the AC adaptor is connected to this
SD Multi AV Device, the SD Multi AV
Device cannot be fitted on the AV Cradle.
ª Playing Back on an external
device ( l 36)
≥When connecting, turn the power [OFF].
≥To cause the display on the screen to
disappear, set [DISPLAY] in the [DISPLAY
SETUP] menu to [OFF].
≥In the connection described in this item,
the speaker or the stereo earphones of
this Device cannot be used.
≥To view pictures on the LCD monitor of the
SD Multi AV Device fitted on the AV
Cradle, set the AV output control switch to
[LCD MONITOR]. (The sound is also
heard from the speaker of the SD Multi AV
Device.)
≥If the SD Multi AV Device is connected to
an external device, such as a TV and it
outputs video and audio to the device, the
sound is not heard from the speaker of
this Device even with [BEEP] in the menu
set to [ON].
≥Part of the characters may be clipped on
the screen, depending on the type of TV.