Philips 6756 X - Manual (Page 9)

Important
C
◗Only use the power plug and the charging stand
provided to charge the razor.
◗ The power plug transforms 100-240 AC volts
to 12 volts DC.
◗ An adaptor plug may be necessary for cord
usage in some foreign countries.Your new razor
will automatically convert internally to work on
100V to 240V AC/DC systems.
LED Charging Indications
◗ As soon as you start charging the razor, the
green charging indicator light will go on.
◗ When the batteries have been fully charged,
the green charging indicator light will start
blinking.
◗ The red recharging indicator light will blink
when batteries are almost empty.
◗ The red recharging indicator light will blink a
few times after the razor has been switched off.
Charging
◗ Charging or recharging at temperatures below
40ºF or higher than 95ºF adversely affects
lifetime of batteries.
◗ Battery Performance is best if you recharge
only when batteries are (almost) completely
empty.
◗ Do not charge razor in pouch.
1 Connect the small plug into the charging
stand and put the power plug into any
ENGLISH
10
6756X B_W new DFU 9/12/03 5:25 PM Page 10 (Black plate)