Pioneer DVR1910LS - Manual (Page 7)

FEATURES
ƒ Write Speed (*CAV, **ZCLV, *** This specification describes the maximum speed in one zone.)
DVD-R 1x, 2x, 6x, 8x**, 12x**, 16x**, 18x**, 20x**
DVD-R (DL) 2x, 4x, 6x, 8x***
DVD-RW 1x, 2x, 4x, 6x
DVD+R 2.4x, 4x, 6x, 8x**, 12x**, 16x**, 18x**, 19.6x**
DVD+R (DL) 2.4x, 4x, 6x, 8x***
DVD+RW 2.4x, 3.3x, 4x, 6x, 8x**
DVD-RAM 2x, 3x, 5x, 6x, 8x, 12x
CD-R 4x, 10x, 16x, 24x**, 32x**, 40x**
CD-RW 4x, 10x, 16x, 20x**, 24x**, 32x**
ƒ Maximum Read Speed
DVD-ROM (single) 16x DVD-ROM (DL) 8x
DVD-R, DVD+R 12x DVD-R (DL) 8x
DVD-RW, DVD+RW 8X DVD+R (DL) 8x
CD-ROM, CD-R 40x CD-RW 32x
DVD-RAM 12x**
DualDisc (please refer to the previous page in this document)
ƒ IDE Data Transfer Mode PIO Mode 4 / Multi-Word DMA Mode 2 / Ultra DMA Mode 4
ƒ Buffer Memory Size 2 MBytes (Read/Write)
ƒ 5.25” Half-Height built-in type
ƒ Stereo Audio Output
ƒ Horizontal / Vertical orientation
ƒ Low vibration mechanism
ƒ LightScribe for identifying/marking discs (with applicable LightScribe software and media)
ƒ Disc Format (Read/Write)
DVD single layer/dual layer / 120mm / 80mm disc
DVD-R (when writing, use only 650nm – for General use – media)
DVD-R (4x, 8x, 16x, 18x, 20x write speed)
Dual Layer DVD-R and Double Layer DVD+R
DVD-RW (1x, 2x, 4x, 6x write speed)
DVD+R (2.4x, 4x, 8x, 16x, 18x, 19.6x write speed)
DVD+RW (2.4x, 4x, 8x write speed)
DVD-RAM (non-cartridge, Version 2.0, Version 2.1) (2x, 3x, 5x, 6x, 8x, 12x write speed)
LightScribe DVD and CD (12cm, Ver 1.0 and 1.2)
CD-ROM Mode 1
CD-R XA Mode 2 (form 1, form 2)
Photo CD (single and multiple sessions)
CD-DA
CD-Extra (CD PLUS)
Video-CD
CD Text
CD-R
CD-RW / High Speed CD-RW / Ultra Speed CD-RW
Note:
ƒ A specific application program is necessary to write the formats listed above.
ƒ Supported media required for specific DVD and CD writing speeds.
ƒ When writing to DVD at 12x and 16x and above, use Pioneer-tested media. For media brand information, refer to the Pioneer website:
www.pioneerelectronics.com
ƒ To use LightScribe, a LightScribe drawing software program and applicable media are necessary.
ƒ When creating a LightScribe disc label image, burning a second drawing on top of the first drawing affects the final label quality.
6
En