Prismacolor CEILING MOUNT CB-200 - Manual

Assembly Instructions
Parts list:
„ Ceiling mounting plate (1 pc)
„ Upper extension rod (1 pc)
„ Lower extension rod (1 pc)
„ Universal base plate connector (1 pc)
„ Long connector arm (2 pcs)
„ Short connector arm (4 pcs)
„ Extension arm (4 pcs)
„ Prismasonic logo plate (2 pcs)
„ Bottom spacer (4 pcs)
„ Spacer 1mm (4 pcs)
„ Spacer 2mm (4 pcs)
„ Spacer 4mm (4 pcs)
„ Cap screw, M6 x 10 (12 pcs)
„ Cap screw, M6 x 12 (2 pcs)
„ Cap screw, M8 x 55 (5 pcs)
„ Self-locking nut, M8 (5 pcs)
„ Truss head screw, M6 x 5 (2 pcs)
„ Truss head screw, M4 x 15, M4 x 20, M4 x 25 (4 pcs)
„ Truss head screw, M5 x 15, M5 x 20, M5 x 25 (4 pcs)
„ Truss head screw, M6 x 15, M6 x 20, M6 x 25 (4 pcs)
„ Square nut, M6 (4 pcs)
„ L-wrench, 3 mm
„ L-wrench, 4 mm
„ L-wrench, 6 mm
„ Screw Driver, PHILLIPS
„ Spanner Wrench, ADJUSTABLE
„ Assembly manual
Prismasonic Ceiling Mount CB-200
Installation Instructions:
Carefully remove and unwrap all the contents of box. Referring to the list
below, make sure you have everything needed to proceed with the
assembly of the mount. If any parts are missing, contact Prismasonic
immediately.
Ceiling Mount
CB-200
Prismasonic Ceiling Mount CB-200
Thank you for using the Prismasonic Ceiling Mount CB-200. The mount is designed for top
professional installers as well as end users who want the most effective and stylish solution
for the projector-anamorphic lens installation. Designed to fit almost any projector under 15
kg (33 lbs) with the Prismasonic lens, the CB-200 comes preassembled for quick and easy
installation at any location. The design allows for cable management to provide the clean
and uncluttered look. The robust construction allows mounts to be precisely positioned in
almost any angle.
Thank you for your purchase, and happy viewing!
–The Team at Prismasonic